Miller Edge ME110 – Small Profile Sensing Edge for Grilles & Shutters
The Miller Edge ME110 is a streamlined sensing edge measuring 7/8″ wide × 3/4″ tall — ideal for doors, grilles and shutters up to 1 inch thick, where performance and appearance both matter.
When touched lightly or at an angle, it sends an immediate signal to stop and/or reverse operation. This slide-in style edge has multiple mounting channel options, allowing easy installation on any style of counter shutter or grille.
Before you order — four things to confirm
1. Length. Built to your measurement, ordered in 1/4 inch increments.
2. Cord location. Left, right, end, or top — see the diagram below.
3. Mounting channel. ME110-C, ME110-C2, or ME110-C3 — see below.
4. Monitoring. The designator is set by your operator, not by the edge — see the designator guide.
Not sure this is the right model? See Which Miller Edge Sensing Edge Do I Need? Or call (866) 965-5599.
Applications
- Rolling counter shutters and grilles
- Doors up to 1 inch thick
- Machine guarding
- Conveyor systems
Features
- Small profile — 7/8″ W × 3/4″ H, ideal for doors up to 1 inch thick
- Compact design, excellent for safeguarding machines and conveyors
- Easy to install; mounts vertically or horizontally
- Sealed assembly, impervious to dust and debris
- Various mounting channel options
- Custom manufactured to user specifications for length and cord location
- Flexible PVC exterior
- Patented Alumaglas™ contact element for superior performance (electric option)
- UL 325 Recognized Component
- 1-year warranty
- Made in USA
Mounting Channel Options
| Option | Material |
|---|---|
| ME110-C | Black rigid PVC |
| ME110-C2 | Black rigid PVC |
| ME110-C3 | Black rigid PVC with double-sided tape |
Choose the profile that matches your mounting surface, or select NONE if you are replacing an edge in a channel you already have.
Cord Location
The cord location is where the lead exits the edge. ME110 is available with four positions:
- L or R — left or right, referenced from the inside looking out. Which side is your operator mounted on?
- E — end of the edge
- T — top, exiting the back face
Get this wrong and the lead runs the opposite way across the opening — and the edge is built to order. See the Gate Edge Handing Guide if you are unsure.
Monitored or Non-Monitored?
Monitored edges are required for UL 325 listed operators built after August 29, 2010 that have a monitored circuit. For older units and most other applications, a non-monitored edge is used.
ME110 is available as 2-wire monitored, 4-wire monitored, 2-wire non-monitored, Air-Wave, or bumper (no sensor). The designator is set by your operator, not by the edge. See the full designator guide for the T1 through T6 reference table.
Important: Sensing edges are custom made and are not returnable. Please confirm the correct designator with your operator manufacturer before ordering.
Related Product
The MC110 Edge Kit bundles the ME110 edge with guide caps and an ME110-C channel at special net pricing — worth comparing if you need the channel anyway.
Downloads
ME110 Specifications (PDF)
Complete Ordering Guide for Monitored Openers (PDF)
Gate Edge Handing Guide (PDF)
