Every current Genie Intellicode remote, wireless keypad and receiver, plus universal remotes that cover older Genie openers. All current Genie remotes use Auto-Seek Dual Frequency (315/390 MHz) and work with both Intellicode 1 and Intellicode 2 openers — they also operate Overhead Door CodeDodger openers, which use the same radio system.
Every Genie opener built from 1995 on uses Intellicode rolling-code technology — including all Genie Series II openers and the Intellicode screw drive, belt drive, chain drive and wall-mount models. Any remote below will program to it: Intellicode 1 or Intellicode 2, 315 or 390 MHz, the remote finds the right code and frequency automatically.
| Remote | Description |
|---|---|
| G3T-BX | Genie 3-button remote (37218R) — the standard replacement for any discontinued Genie Intellicode remote. Controls up to 3 openers. |
| G3BT-P | Genie 3-button remote, newest generation (41538T). |
| G1T-BX | Genie 1-button remote (38501R) — simple single-door replacement. |
| GR-390M | Mini keychain Intellicode remote — replaces the discontinued ACSCTG Type 1, 2 and 3 remotes. |
| GU4T-BX | Genie 4-button universal remote (40659R) — runs Genie Intellicode plus LiftMaster, Chamberlain, Overhead Door, Linear and Stanley openers. Best choice for mixed-brand garages. |
| GK2-P | Genie wireless Intellicode keypad (42368R) — controls up to 3 openers, supports a temporary PIN. Replaces older Genie keypads. |
| L979U | LiftMaster universal wireless keypad — also programs to Genie Intellicode openers. |
| Aladdin Connect | Smartphone control retrofit kit (39142R) — open, close and monitor from your phone. Extra door sensor available. |
These are fixed-code 390 MHz openers. Look at the switches: if each switch has two positions (up/down), the GU4T-BX universal remote works — you set its internal switches to match your opener. The original GT912 and GM3T GenieMaster remotes have been discontinued by Genie.
| Remote | Description |
|---|---|
| GU4T-BX | Genie 4-button universal remote (40659R) — covers Genie 9-switch and 12-switch two-position openers, plus all Intellicode models. |
| GD-390 | Budget mini keychain remote for 9-switch openers only. |
| 365LM-1KIT | Plug-in receiver conversion kit with remote — bypasses the old radio entirely. Very easy install: plug it into an outlet and connect two wires to the opener’s wall-button terminals. |
If your switches have three positions (+/0/−), the matching remotes are no longer made — convert the opener with the 365LM-1KIT receiver kit instead.
Early Genie and Alliance openers (Cryptar, Command Control, Executive, early number-series models) used remotes that have been discontinued for decades, and no universal remote transmits those codes. Two options:
• Add modern remote control with the 365LM-1KIT universal plug-in receiver kit — it plugs into an outlet and connects with two wires to the opener’s wall-button terminals, and includes a remote. Works on nearly any opener, any brand or age, and is very easy to install.
• Replace the opener — openers this old predate the safety-reversal sensors required since 1993, so a new opener is the safer long-term answer. See our residential garage door openers.
Every Genie opener made from 1995 to today uses Intellicode — if your model isn’t listed below, it takes any of the current remotes in section 1. That includes every model sold under the names ChainLift, BeltLift, ReliaG, QuietLift, SilentMax, ChainMax, IntelliG, StealthDrive, StealthLift, Chain Glide, ChainDrive, PowerMax, PowerLift, GPower, DuraDrive, EnduraDrive, TriloG, MachForce, Excelerator, DirectLift, ProMax IC and Pro Connected.
Intellicode models — use the G3T-BX, G1T-BX or any remote in section 1:
9/12-switch models — use the GU4T-BX (two-position switches):
Pre-1985 models — remotes discontinued; convert with the 365LM-1KIT receiver kit or replace the opener:
Match your old remote’s model number (printed on the back or under the visor clip) to its current replacement:
| Discontinued model | Current replacement |
|---|---|
| GIT-1, GIT-2, GIT-3, GITR-3 | G3T-BX |
| GICT390-1, GICT390-3, GICT390-4 | G3T-BX |
| GICTD-1, GICTD-3, GCT-3 | G3T-BX |
| ACSCTG Type 1, 2, 3 / ACSGT | GR-390M or G3T-BX |
| GT912, GT90-1, GPT90-1, GPT90-3 (9/12-switch remotes) | GU4T-BX |
| GM3T / GM3T-R GenieMaster | G3T-BX (for a 9/12-switch opener: GU4T-BX) |
| 375LM, 380UT, 374UT (LiftMaster universal remotes) | GU4T-BX |
| GIC-390 (add-on Intellicode receiver) | 36163R.S receiver |
| GR390-12 (12-switch receiver) | 36163R.S receiver plus new Intellicode remotes |
| GWKP and other older Genie keypads | GK2-P keypad |
| Product | Description |
|---|---|
| 36163R.S | Genie Intellicode dual-frequency (315/390 MHz) receiver — adds Intellicode remote control to gate operators, commercial doors, or any opener with a discontinued add-on receiver. |
| 365LM-1KIT | LiftMaster 365LM universal plug-in receiver kit with one remote — converts nearly any opener, any brand or age, to modern remote control. Plug it into an outlet, connect two wires to the opener’s wall-button terminals, done. Holds up to 8 LiftMaster Security+ remotes. |
CR2032 3V lithium remote battery • Visor clip for GIT/GM3T remotes • GIT visor clip
Need repair parts instead of a remote? See our Genie garage door opener replacement parts, organized by model with diagrams. Questions about compatibility? Email parts@gatehousesupplies.com — we answer quickly, often evenings and weekends.