LiftMaster Wall Controls, Door Arms & Hardware
LiftMaster Wall Controls, Door Arms and Installation Parts
These parts fit across the LiftMaster range rather than one model — wall controls, remotes and clips, door arms and brackets, the emergency release, sensor wire and lubricant. The one thing you do need to check is the wall control, because those are not universal. See the compatibility table below before ordering one.
Wall controls are not universal — check this first.
| Your opener | Order |
|---|---|
| Pre-1998 (no Security+) | 041C0494-2, or a simple two wire button |
| Any era, two wire | 041A4166 or 041A4202-6B |
| 1998 onward, Security+ 2.0 / 3.0 / MyQ | 889LM and the Security+ 3.0 panels below |
Fitting a MyQ or Security+ 3.0 panel to a pre-1998 opener will not work. If you are unsure which you have, the model number is on the label under the light lens — or call (866) 965-5599 and we will check it with you.
1. Wall Controls
Two wire — works on any LiftMaster opener
| Ref | Part # | Description |
|---|---|---|
| 12 | 041A4166 | Lighted pushbutton |
| — | 041A4202-6B | Wall control panel |
| — | 041C0494-2 | Multi-function door control panel — the replacement for pre-1998 openers |
Security+ 2.0, Security+ 3.0 and MyQ — 1998 openers onward
| Ref | Part # | Description |
|---|---|---|
| — | 889LM | MyQ control panel |
| — | 882LM | Multi-function control panel, Wi-Fi — now 882LMW |
| — | 886LMW | Motion detecting control panel |
| — | 883LMW | Door control button |
| — | G885LM | Wireless control panel |
| — | 041-0491-000 | Multifunction control panel, Security+ 3.0 |
| — | L955W | Multifunction control panel, Security+ 3.0 |
| — | L956W | Wireless control panel, Security+ 3.0 |
| — | L957W | Motion detecting control panel, Security+ 3.0 |
| — | L958W | Smart control panel, Security+ 3.0 |
Superseded wall controls
| Old Part # | Order Instead | Notes |
|---|---|---|
| 041C0494-1 | 041C0494-2 | Multi-function door control panel |
| 41C494 | 041C0494-2 | Soft glow panel, ref 15, discontinued |
| 98LM | 886LMW | Motion detecting panel, discontinued |
| 398LM | 889LM | Control panel, discontinued |
| 888LM | 889LM | Control panel, discontinued |
2. Remotes, Clips and Batteries
First part of number below corresponds to diagram number above:
| Ref | Part # | Description |
|---|---|---|
| 01–02 | 893MAX | 3 button visor remote — universal replacement for all older remotes |
| 03 | 10A20 | 3V CR2032 remote battery |
| 05 | 10A14 | 12V battery — 61LM series remotes |
| 10 | 29C128 | Remote visor clip |
| 10b | 29B137 | Remote visor clip — 700 and 800 series remotes |
| — | 041A3504 | Antenna extender kit |
| — | 041A3504-1 | Antenna extender kit with adapter |
The 893MAX replaces every discontinued LiftMaster, Chamberlain and Craftsman remote — 371LM, 971LM, 973LM, 893LM, 81LM, 83LM, 63LM, 753CB, 850CB, 853CB, 953CB, 953EV and Craftsman 53680, 53859, 53879. If your remote range has dropped off, try the antenna extender before replacing the opener's board. Browse all LiftMaster remote controls.
3. Door Arms and Brackets
| Ref | Part # | Description |
|---|---|---|
| 07 | 041A4353 | Header bracket, 1993 to current |
| 07 | 041A4353-1 | Header bracket, black — belt drive units |
| 08 | 041A5047 | Door bracket |
| 08 | 041A5047-1 | Door bracket, black — belt drive units |
| 16 | 041B0035B | Curved door arm |
| 17 | 4178B0034B | Straight door arm section |
| — | 041A8094 | Door arm kit — curved and straight sections together |
The 041A8094 kit contains both arm sections and is usually the better buy if you are replacing the arm rather than repairing it. Black brackets are cosmetic only — they fit the same as the plain versions.
4. Release, Wiring and Hardware
| Ref | Part # | Description |
|---|---|---|
| 09 | 041A2828 | Manual release rope and handle assembly |
| 06 | 041B4494-1 | 2 conductor bell wire, 26 ft — safety sensor wire |
| — | 041A2770-17 | Installation hardware kit — bolts, staples, grease, release cord |
| — | L6950 | Multi purpose spray lube, green |
| — | L6960 | Multi purpose spray lube, blue |
The 041A2770-17 hardware kit is the one to order if you are reinstalling an opener and the original bag is long gone — it covers the sensor bolts, staples, release cord and grease.
5. Safety Sensors
| Ref | Part # | Description |
|---|---|---|
| — | 041-0136 | Safety sensor eye kit — sending and receiving eyes, matched pair |
| — | 041-0155-000 | Safety sensor brackets, 2021 to present |
| — | 041B0873 | Sunblocker bracket — stops sunlight false-tripping the eye |
The 041-0136 replaces the older 41A5034 kit and fits every LiftMaster opener from 1993 onward. See all LiftMaster safety eye sensors and brackets.
More LiftMaster Parts
Safety eye sensors · Belt drive rail parts · Chain drive rail parts · All LiftMaster opener parts · LiftMaster remote controls