DoorKing 6006 Swing Gate Actuator Parts
DoorKing 6006 Swing Gate Actuator Replacement Parts
Genuine DoorKing replacement parts for the 6006 linear swing gate actuator, drawing 6006-380 Rev A, covering the 6006-380 primary and 6006-381 secondary actuators. Part numbers on the diagrams are called out by number rather than by reference key, so the tables below list them in numeric order. Click any part number to go straight to that product page.
The 6006 is a 24 VDC linear actuator — a sealed screw-drive arm, not a cabinet operator. It has no belt, chain, clutch or gearbox in the usual DoorKing sense: the motor turns a worm and bevel gear set, which turns a drive screw, which pushes a travel nut along the arm. The wear items are the travel nut assembly, drive screw, bronze bushings and thrust bearing.
Parts marked (hardware kit) ship in the mounting hardware kit with a new actuator and are also sold individually.
Actuator Assembly — Cases, Limits, Wiring & Mounting
| Part Number | Description | Qty |
|---|---|---|
| 0601-120 | Wire, control cable | 1 |
| 1496-010 | PCB filter (hash filter) | 1 |
| 2616-018 | Screw, Phillips head 8-32 x 1/2 in. | 2X / 4X |
| 2616-113 | Screw, No. 6 for plastic | 2X |
| 2616-118 | Screw, flat head 6-32 x 5/16 in. | 4X |
| 2616-311 | Screw, socket head low profile 10-32 x 1/4 in. SS | 2X |
| 2616-315 | Screw, socket head 10-32 x 5/8 in. | 1 |
| 2616-330 | Screw, socket head cap 10-32 x 1-1/4 in. | 6X / 4X / 10X |
| 2616-830 | Stud / set screw, 10-32 x 1-1/8 in. SS | 2X |
| 2620-015 | Washer, flat .20 ID x .50 OD | 2X |
| 2620-044 | Lock washer, #8 | 2X / 11X |
| 2620-046 | Lock washer, split #10 SS | 2X / 4X / 11X |
| 2902-006 | Nut, nylon lock 10-32 | 2X |
| 2902-009 | Nut, nylon lock 5/16-18 (hardware kit) | 1 |
| 6006-001 | Allen wrench, 5/16 in. (hardware kit) | 1 |
| 6006-002 | Allen wrench, 3/32 in. (hardware kit) | 1 |
| 6006-016 | Spring, release lever | 1 |
| 6006-024 | Tube | 1 |
| 6006-138 | Release arm | 1 |
| 6006-140 | Rear anchor (hardware kit) | 1 |
| 6006-152 | Pin, dowel stainless (hardware kit) | 1 |
| 6006-156 | Bushing strap | 1 |
| 6006-158 | Bushing strap, straight | 1 |
| 6006-159 | Bushing strap, offset | 1 |
| 6006-172 | Grommet | 2X |
| 6006-175 | Limit cover | 1 |
| 6006-178 | Slot cover, urethane | 1 |
| 6006-181 | Connector board mount | 1 |
| 6006-185 | Bearing cap | 2X |
| 6006-210 | Actuator lower case | 1 |
| 6006-233 | Bushing, bronze sintered (hardware kit) | 1 |
| 6006-235 | Post mount bracket (hardware kit) | 1 |
| 6006-240 | Gate mount bracket (front anchor) (hardware kit) | 1 |
| 6006-250 | Shoulder bolt (hardware kit) | 1 |
| 6006-310 | Closed limit assembly | 1 |
| 6006-320 | Open limit assembly | 1 |
| 6010-015 | Strain relief, liquid tight | 1 |
| 6010-017 | Strain relief, dome fitting (control box) (hardware kit) | 1 |
Internal Assembly — Motor, Gear Train, Drive Screw & Release
| Part Number | Description | Qty |
|---|---|---|
| 1215-020 | O-ring | 1 |
| 1702-513 | Cam, 3/4 in. | 1 |
| 2600-378 | Magnet, .375 d x .100 in. th (reference) | 1 |
| 2615-010 | Bolt, hex head 1/4-20 x 2 in. Gr8 | 2X |
| 2616-056 | Screw, Phillips head 10-32 x 1-1/2 in. | 1 |
| 2620-023 | Washer, 5/8 in. SAE | 1 |
| 2620-409 | Nut, hex flange lock 1/4-20 | 3X |
| 2630-028 | Snap ring | 1 |
| 2630-040 | Snap ring | 2X |
| 2630-045 | Snap ring | 2X |
| 2902-013 | Nut, nylon lock 5/8-11 | 1 |
| 2902-060 | Nut, kep 5 mm | 2X |
| 2905-067 | Screw, Phillips head 1/4-20 x 3/4 in. | 1 |
| 4001-055 | Cam lock | 1 |
| 6006-003 | Cap, bolt head 1/4-20 (hardware kit) | 2X |
| 6006-015 | Shim, round | 1 |
| 6006-019 | Gasket, cam lock | 1 |
| 6006-021 | Thrust bearing, needle | 1 |
| 6006-027 | Shim, round 5/8 ID x 1 OD x .005 thk | 2X |
| 6006-031 | Spring | 1 |
| 6006-092 | Release handle / arm | 1 |
| 6006-093 | Release cam | 1 |
| 6006-095 | Washer, PTFE plastic | 1 |
| 6006-098 | Ball, steel alloy 6 mm | 4X |
| 6006-101 | Drive pivot panel | 2X |
| 6006-102 | Block pivot anchor | 1 |
| 6006-103 | Threaded pin | 1 |
| 6006-105 | Travel nut assembly | 1 |
| 6006-106 | Pin, dowel | 1 |
| 6006-112 | Release plunger | 1 |
| 6006-115 | Gear cross shaft | 1 |
| 6006-116 | Bevel gear | 2X |
| 6006-118 | Drive screw shaft | 1 |
| 6006-120 | Bearing, sealed 25 mm | 2X |
| 6006-122 | Pin, drive shaft | 1 |
| 6006-127 | Drive screw connector shaft | 1 |
| 6006-150 | Motor, 24 VDC PMDC | 1 |
| 6006-155 | Motor bracket, rear | 1 |
| 6006-160 | Bump stop | 2X |
| 6006-166 | Bushing, bronze sintered | 2X |
| 6006-192 | Motor block mount | 1 |
| 6006-200 | Actuator upper case | 1 |
| 6006-215 | Worm gear, bronze | 1 |
| 6006-220 | Worm, motor attachment | 1 |
Common 6006 Problems and the Parts That Fix Them
| Symptom | Usual Cause | Parts |
|---|---|---|
| Motor runs but the arm does not extend or retract | Stripped travel nut | 6006-105 travel nut assembly, 6006-118 drive screw |
| Grinding or clicking from inside the case | Stripped worm or bevel gear | 6006-215 bronze worm gear, 6006-220 worm, 6006-116 bevel gears (2) |
| Arm has play, or the screw rumbles under load | Worn bushings or thrust bearing | 6006-166 bronze bushings (2), 6006-021 thrust bearing, 6006-120 sealed bearings (2) |
| Gate will not stop at the open or closed position | Failed limit assembly | 6006-310 closed limit, 6006-320 open limit, 6006-175 limit cover |
| Manual release will not disengage the arm | Worn release cam, plunger or spring | 6006-093 release cam, 6006-112 plunger, 6006-031 spring, 6006-092 handle |
| Actuator dead, no response to any input | Failed motor or hash filter | 6006-150 24 VDC motor, 1496-010 PCB filter, 0601-120 control cable |
| Water inside the case, corrosion on the screw | Perished slot cover or strain relief | 6006-178 slot cover, 6010-015 strain relief, 6006-019 cam lock gasket |
| Actuator loose at the gate or post | Worn mounting hardware | 6006-240 gate bracket, 6006-235 post bracket, 6006-233 bushing, 6006-250 shoulder bolt |
Related DoorKing Pages
Other DoorKing swing gate operator parts: 6050 · 6100 · 6300 · 6500 · all DoorKing gate operator parts. Need a complete unit rather than parts? See DoorKing swing gate operators. Mounting brackets, control boards, transformers and accessories for the 6006 are all listed in the product grid below.