The AT5406 Access Control Tag is a half frame, battery-powered radio frequency (RF) tag used in automatic vehicle identification applications with TransCore's Amtech brand and TransCore Encompass multiprotocol reader systems. This dual-frequency tag is designed for interior mounting on a nonmetallized windshield.
** These are special order are non returnable***
Min order 25 pcs
Supports Super eGo® (SeGo), eGo, and ATA protocols f Dual-frequency (915 and 2450 MHz) f 2048-bit read/write memory f Read/write capability in SeGo mode f Compatible with multiple Amtech-brand readers and TransCore Encompass multiprotocol readers f Data encryption and authentication f Non-replaceable internal battery with an 8-year design life, based on typical usage f Impact resistant, molded plastic case f Wiegand programming available f Interior mounting on non-metallized windshield
COMMUNICATIONS Frequency Range 902 to 928 MHz 2425 to 2475 MHz Typical Working Range 5 to 35 ft (1.5 to 11 m) Range depends on system parameters Polarization Linear, horizontal SOFTWARE FEATURES Data Memory SeGo and eGo Modes: 2,048 bits ATA Mode: 60 bits, or Wiegand 26- to 54- bit format of customer data User memory programmable using RF link POWER REQUIREMENTS Power Source Lithium battery with 8-year typical life PHYSICAL Dimensions Size: 4.5 x 2.5 x 0.7 in. (11.4 x 6.4 x 1.8 cm) Weight: 3.5 oz (99 g) Case The plastic case is UV stable. Operation is not affected by temperature extremes or severe conditions typical of this environment. The case is shock and vibration resistant. The standard color is light gray. Mounting Location Interior: Non-metallic windshield Mounting Method Semi-permanent Mounting: Double-sided tape Removable Mounting: Adhesive-backed hook-and-loop material attached to the tag and to the vehicle windshield ENVIRONMENTAL Operating Temperature -40°F to +185°F (-40°C to +85°C) COMPATIBILITY Super eGo Mode: SeGo eGo Mode: ANSI NCITS 256-2001 Part 4.2 and ISO 18000-6B standards ATA Mode: American Trucking Associations standard OPTIONS Double-Sided Tape For semi-permanent interior installation, the user can specify factory-applied doublesided tape. Hook-and-Loop Material For removable installation, the user can specify factory-applied hook-and-loop material.
