Genuine Platinum Access GOC-4200 board kit — the GOC-4200 main control board together with the GOC-4200LDR loop detector board and the 6-pin and 7-pin cables that join them. It is the replacement set for the discontinued ECU4000 control box (GOC-4000 / GOC400 board) on the ACTP715, ACT-715, UGP712 and CM-712 swing operators, and the right order when both boards or the cables are suspect.
Kit or board? If only the main board has failed and the loop board and cables are good, the GOC-4200 board on its own is the cheaper repair. Order the kit for an ECU4000 box, or when the loop board or its cables have gone with the main board.
Specifications
| Part number | GOC-4200-KIT |
|---|---|
| Contents | GOC-4200 (BLGOC-4200) main board, GOC-4200LDR loop board, 6-pin cable, 7-pin cable |
| Replaces | ECU4000 board set (GOC-4000 / GOC400) |
| Fits | Platinum Access ACTP715 / ACT-715, UGP712, CM-712 |
| Entrapment protection | Requires at least one monitored photo eye |
| Condition | Genuine Platinum Access, new; circuit boards are non-returnable |
Which operators use it
| Operator | Kits |
|---|---|
| ACTP715 swing actuator | ACTP715-SK · ACTP715-MSK |
| UGP712 underground swing | UGP712-SK · UGP712-MSK |
| CM-712 swing | CM-712-SK · CM-712-MSK |
After fitting
Fit both boards and the cables, learn the limits on each arm, connect and learn the monitored photo eye, then re-test the loops and the reversal in both directions.
Fit surge protection when you fit the board. Lightning and utility surges are the most common reason a gate operator or entry system board is replaced, and a new board on the same unprotected supply is at the same risk.
Related
GOC-4200 board only · GOC-4200LDR loop board · Platinum swing gate operators
Not sure which board you need? Send a photo of the number printed on your existing board to parts@gatehousesupplies.com or call 866-965-5599. We would rather confirm it than have you fit the wrong board.
