Elite AH107 4" Power V-Wheel — sold as a pair (2 wheels). Solid steel, gold zinc plated, with sealed ball bearings. These are the load wheels a sliding or rolling gate rides on, running in the V of an inverted angle-iron track. Need a single wheel rather than a pair? See the AH108.
| Wheel diameter | 4 in. |
| Material | Solid steel, gold zinc plated |
| Groove | V-groove, for inverted angle-iron track |
| Width | 1.75 in. (2 in. overall with bearing protrusion) |
| Bearings | Ball bearings, sealed |
| Axle bolts | 1/2 in., included |
| Load rating | 3,000 lb |
| Quantity | Pair (2 wheels) |
When to replace them. Worn V-wheel bearings are the usual cause of a sliding gate that grinds, judders or drags as it travels, and of a gate that sits low at one end. Replace wheels in pairs so the gate stays level and the load stays even.
What else you may need. If the brackets are rusted or you are hanging a new gate, add V-wheel mounting plates. For the full range of wheels, guide rollers, catches and drive chain, see sliding gate hardware.
