BD Loops Sawcut Loops
Bd Loops Sawcut Loop system.
Many sizes are available for your driveway size and application
Loops are listed by perimeter size and lead length.
Example 18 ft perimeter loop can be laid out 6ft x 3ft or 5ft x 4ft or any combination with and 18 ft perimeter
Loops should always be a minimum of 3 feet wide, wider if taller vehicles are using the gate
Preformed 3/16” Saw-cut Loop
Used for saw-cut installations where a 3/16” or larger groove is cut into the concrete or asphalt and the wire is stuffed and sealed (using loop sealant) into the surface.
Our saw-cut loops have a custom durable polyethylene outer jacket that protects nylon coated polyethylene insulated 16AWG stranded wire. BD Loops Saw-Cut Loops have a built in wing shaped backer-rod that causes the loop to fit snugly in a 3/16” saw-cut groove. Our unique wire design prevents the installer from having to install backer-rod and creates a seal at the bottom of the groove, allowing the installer to apply sealant to a flat surface and resulting in at least a 30% savings in loop sealant to seal the groove vs. hand wrapped wires in a ¼” wide groove.
The entire loop including the lead-in fits within a 3/16” saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in.