41A3589-3 Belt 7 ft Aftermarket | Fits LiftMaster 1270

41A3589-3 Garage Door Opener Belt 7 ft Door - Aftermarket, Fits LiftMaster

(No reviews yet)

SKU:

041A3589-3 non oem

Availability:

In Stock

Description

Aftermarket 41A3589-3 belt assembly for a 7 ft tall garage door. Same length, same groove profile, same fitment as the factory belt — at roughly a third of the price. Fits LiftMaster 1270, 1280 and 1280R, plus the equivalent Chamberlain and Sears Craftsman openers of that generation.

Aftermarket or genuine — which should you buy?

An honest answer, because both have their place.

	This aftermarket belt	Genuine LiftMaster 41A3589-3
Fitment	Identical — same length, same grooves, same mounting	Identical
Price	Roughly a third of the OEM price	Full factory price
Made by	Third party to the same specification	LiftMaster / Chamberlain
Choose it when	The opener is out of warranty and you want the door working again without paying factory prices. This is what most installers fit.	A warranty, an insurance requirement or a written specification calls for genuine OEM parts

Want the factory part instead? Genuine LiftMaster 41A3589-3.

Specifications

Replaces part number	41A3589-3 (also written 41A3589-3)
Door height	7 ft
Belt length	Approximately 233 inches
Grooves	12 grooves in a 6 inch span
Belt family	41A3589
Fits	LiftMaster 1270, 1280 and 1280R
Type	Aftermarket equivalent, not OEM

Is this the right belt?

Two things must match: the belt family and the door height. Check the number printed on your old belt — if it reads 41A3589-3 or 41A3589-3, this is the one. Otherwise go by your opener model, which should be one of: 1270, 1280, 1280R.

Measure the door opening, not the old belt — if someone previously fitted the wrong length, measuring it repeats the mistake.

Other lengths, aftermarket

Door height	Aftermarket	Genuine
7 ft — this belt	41A3589-3 aftermarket	41A3589-3
8 ft	41A3589-1 aftermarket	41A3589-1
10 ft	41A3589-2 aftermarket	41A3589-2

Wrong family? The 41A5434 fits 2500, 2580, 2280, 3280, 3500, 3850, 8550. The 41A5250 fits WD822K, WD912KS, WD922K, LW2000, LW3500. These are not interchangeable. See the belt and rail selector if you are unsure.

Is the belt actually the problem?

Symptom	Likely cause
Belt frayed, split or snapped	This belt
Belt intact but slack, will not hold tension	41B4103 tensioner — far cheaper, and a common misdiagnosis
Belt pulled out of its anchor at the trolley	041B5669 belt clip & link
Door releases on the cord but will not re-engage	41B3869-1 trolley assembly

Common questions

Will an aftermarket belt void my warranty? If the opener is still under a manufacturer warranty that specifies OEM parts, fit the genuine belt. On an out-of-warranty opener — which is most of them by the time a belt fails — there is nothing to void.

Does it last as long? Belt life depends far more on tension and rail condition than on brand. A correctly tensioned belt on a greased rail lasts years; a slack belt on a dry rail does not, whoever made it.

Is it exactly the same size? Yes — same length and groove profile as the 41A3589-3. It fits the same pulley and the same trolley.

Is it the same as a Chamberlain or Craftsman belt? Yes. Those openers share the drivetrain with LiftMaster, so this belt fits all three.

Does it come with a trolley? No, this is the belt only.

LiftMaster belt drive belts & rail parts · belt tensioner · rail grease · all garage door opener parts

Not sure which belt you need? Send us a photo of the old belt and your opener’s model number — parts@gatehousesupplies.com or 866-965-5599. Since 1993.