LiftMaster CPSUN4G Heavy-Duty Monitored Through-Beam Photo Eyes - NEMA 4, 45 ft, Replaces CPS-UN4 - Logic 5/4/3, Medium-Duty and UL 325 Gate Operators

(No reviews yet) Write a Review
SKU:
CPSUN4G
Availability:
In Stock

Liftmaster

$218.70
$179.99
UPC:
012381183012
Condition:
New

Genuine LiftMaster CPSUN4G heavy-duty monitored through-beam photo eyes — the NEMA 4 version of LiftMaster's Commercial Protector System: an emitter and receiver pair in sealed housings that reverses a commercial door or stops a gate when the beam is broken. Up to 45 ft between the eyes, indoor or outdoor, monitored so the operator knows the eyes are connected and working. Black housing; the same device LiftMaster previously sold as the yellow CPS-UN4, covered by the same manual.

CPSUN4G, CPS-U or reflective? The CPS-U is the standard eye shipped with Logic 5.0 and medium-duty operators — NEMA 1, indoor, 30 ft. Choose the CPSUN4G when the eyes see washdown, weather or a wide opening (to 45 ft). Where you can only wire one side of the opening, the CPS-RPEN4 reflective eye needs power on one side only.

Specifications

Part numberCPSUN4G (same device as CPS-UN4); UPC 012381183012
TypeMonitored through-beam photo eye pair (emitter + receiver) — LiftMaster Monitored Entrapment Protection
Range7 to 45 ft
EnclosureNEMA 4 — protects against direct water spray; indoor or outdoor
IndicatorsGreen LED on the emitter, yellow LED on the receiver
Wiring36 in leads, 1/2 in conduit fitting with sealing washer; 20 ga minimum field wire
MountingHeavy-duty housings and brackets included. Doors: no higher than 6 in above the floor. Gates: no higher than 27.5 in above grade
ColourBlack
ConditionGenuine LiftMaster, new

Works with

OperatorNote
LiftMaster commercial door operators — Logic 5, Logic 4, Logic 3 and Medium-Duty Logic (H, HJ, J, T, GT, GH, MH, MHS, MJ, MT, BMT, MGJ, HMJ, SD), FDC, FDCL, FDO, LGEDirect connect. On Logic 4 / Logic 5 with more than one sensor, add the CPS3CARD
LiftMaster 2016 UL 325 gate operators — CSL24U, CSW24U, RSL12U, RSW12U, HCTDCU, LA400PKGU, LA412PKGU, LA500PKGU, CSW200501U / 101U, SL3000501U / 101U, SL585U, SL595UMonitored entrapment input
Earlier LiftMaster gate operators — CSL24V, CSW24V, RSL12V, RSW12V, LA400, LA412, LA500Per LiftMaster's CPSUN4G manual

Common questions

Is this the replacement for the CPS-UN4?
Yes — LiftMaster documents the CPS-UN4 and CPSUN4G in one manual. The CPSUN4G is the current black-housing version.

The door will not close and the operator shows a sensor fault.
Check alignment first: both LEDs steady means aligned. Then check the lens for dirt or sun on the receiver, then the wire run. A monitored eye that is unplugged or shorted stops the door by design.

Do I need both eyes?
Yes — sold as the emitter and receiver pair.

Related

CPS-U · CPS-RPEN4 reflective · CPS-OPEN4 · CPS3CARD · LMRRUL (gates) · LMTBUL (gates)

Not sure which eye your operator takes? Send the operator model to parts@gatehousesupplies.com or call 866-965-5599. We would rather confirm it than have you order twice.