Liftmaster 894LT 4 button visor learning remote

(12 reviews) Write a Review
SKU:
894LT
Availability:
in stock

Product Price: $27.95
UPC:
12381118946

Videos Hide Videos Show Videos

Liftmaster 894LT is designed for Sec+2.0 and Sec+ applications,
also they have the ability to clone Liftmaster / Chamberlain branded Dip-Switch codes.
The following are the key features and benefits of the 894LT:
Replacement for Models 374LM and 974LM
** Assuming the code in the 374 or 974 was originated by a dip switch remote**
Compatible with the following type of operators or receivers Sec+2.0 Sec+ Dip-Switch when cloning other Dip-Switches Remote Controls such as: 811LM, 813LM - Sec+2.0 331LM, 361LM, 362LM, 363LM, 333LM - 315Mhz Sec+ 61LM, 63LM - 390MHz Burst Technology -
Sends out multiple frequencies on the same code at the same time (Sec+2.0 only) 2 and 4 button options
Typically used in gated communities along with a garage door opener.
This single remote control will allow you to copy the code used for the gate instead of carrying 2 remote controls in the vehicle.

Click here for manual

 

Taking a look at the Liftmaster 894LT remote control.It's a 4 button remote control that works on all Liftmaster, Chamberlain, Sears garage door openers that have a Red, Orange, Puple or Round Yello colored learn button.It replaces the 974LM and 374LM remotes that have been discontinued.

To program the unit simply locate the learn button on your garage door opener.If you are having trouble finding it look for the antenna wire hanging down from the motor unit, the logic board is usually right above that.The board has the learn button on it.It may be behind the light bulb cover as shown here or the panel just may be exposed on other models.If you get up on a ladder and you look at it you should see the colored learn button set inside the panel, it could be any color.

To program the remote control simply open the access door on the remote control.You will see the AAA battery and a round black program switch.Simply press and hold that program button, the red LED on the remote control lights up and stays on.Once that's on steady go to your garage door motor, push then release the colored learn button until the LED on the garage door motor comes on.Then on the remote control decide which of the 4 buttons you want to use to control that door and simply push that button.The light on your remote will blink, wait and see if the garage door motor unit responds either by flashing the light bulbs or moving the door.

If it doesn't respond then push that same button on the remote control again and see if the motor responds.Repeat this process until the door responds.Once the door responds then in the remote control press and release the round black button inside next to the battery again and that will lock it in and you're all set to go.

You can now test it and the button you just programed should open your garage door.

Another feature on this remote control is its ability to learn a code directly from a Liftmaster or Chamberlain dip switch remote like a 61LM or 361LM.

To do so simply push and release the round black program button next to the battery inside the 894LT remote.Then press and hold the button on the 61LM or 361LM remote control, the light will blink on the remote control.Then press the button on the 894LT remote that you want to use to control the device.The light will blink fast then goes back to steady.At that point press and release the round program button next to the battery and that will lock it in.

12 Reviews

  • 5
    Excellent Remote

    Posted by Ted Shuel on May 3rd 2017

    We have a gated community, these four button units are great. One button to get into the community, one button for another inner gate and two buttons for the homeowner's garage doors. I highly recommend them. Very easy to program also.

  • 5
    SOMETHING WRONG IN SHIPPING

    Posted by JIMMY ROBERSON on Jun 10th 2016


    YOUR PRODUCT DESERVES A GREAT RATING BUT YOUR SHIPPING DEPARTMENT IS TERRIBLE. I ORDERED MY REMOTES AND 8 OR 9 DAYS LATER HAD NOT GOT ANY SHIPPING CONFIRMATION SO I CALLED. LADY TOLD ME THEY SHOULD HAVE BEEN SHIPPED BUT SOMETHING WAS WRONG IN SHIPPING DEPT. 2 DAYS LATER STILL NO SHIPPING CONFIRMATION. I CALLED BACK AND LADY SAID SHE WAS GOING TO PERSONALLY SEE THAT THEY WERE SHIPPED OUT. THIS WAS A IN STOCK ITEM SO SHE WAS UPSET THAT THEY HADN'T BEEN SHIPPED. GOT THEM VERY FAST AFTER TALKING TO HER.

  • 5
    LiftMaster Remotes

    Posted by Bruce McCandless on May 24th 2016

    Outstanding service. I ordered around noon on a Friday, and received the remotes Monday afternoon by US Mail.

  • 5
    Good Quality and Fast Shipping

    Posted by Ching Peng on Apr 19th 2016

    I purchased 4 LiftMaster 4 button visor learning remote in 2 separate transactions. Fast shipping and excellent quality. I returned a 3 button remote which didn't work I bought from a national hardware store. In addition, the 4 remotes I bought are much cheaper.

  • 5
    Liftmaster 894LT

    Posted by RicG on Oct 23rd 2015

    Nifty, compact, garage door/gate remote. So easy to program, such a practical alternative to multiple remotes!

  • 5
    Great job

    Posted by Michael Joesten on Mar 26th 2015

    Super fast and excellent

  • 5
    Great Service

    Posted by Lisette Wells-Makovic on Jan 30th 2015

    When I ordered online, I was not able to enter the credit card information so I used the online chat. I was told to call in but the phone number was just ringing with no answer. I typed in my phone number in the online chat and Amber called me immediately. She was able to take the credit card information over the phone and expidite my order. Amber made the experience a five star rating.

  • 5
    894 LT/programming

    Posted by Akos Horvath on Jan 14th 2015

    Programming was little tricky at first
    Could not program at the motor housing
    Had to program through wall console
    One out of 8 units was defective, it is opening two doors at once, did not want to erase opener memory because I would have to reprogram 7 others over again

  • 5
    Liftmaster 894LT 4 button

    Posted by DONALD HELSEL on Jul 9th 2014

    I was shipped the wrong items but when I called, they immediately shipped out the correct items which I received the next business day. The products worked perfectly.
    Thank- You