RB-P-K20 Monitored Wireless D.C. (T3) Edge System for Pulsed and N.O. Outputs
The Miller Edge RBand (RB-P-K20) monitored wireless edge system is intended to provide a wireless connection between a monitored sensing edge and a motorized operator installed with a garage door or grille. RBand meets the UL 325 requirements for monitored devices and has been certified as a UL 325 Recognized Component. RB-P-K20 is designed for use with operators that comply with UL 325 using a Miller Edge diode capacitor (DC/T3) configurated sensing edge. Consult your operator manual for detailed instructions about connecting to the motor. The RB-P-K20 receiver is compatible with up to three RB-TX20C transmitters.
KIT CONTENTS
(1) RB-P-RX10: RBand Edge Receiver
(1) RB-TX20C: RBand Edge Transmitter
(2) 3.6V AA lithium batteries*
(4) #6 pan head transmitter mounting screws
* Standard 1.5V AA batteries are not compatible with RBand.
![Miller Edge Miller RB-G-K10C RBand Monitored Wireless Gate Transmitter and Receiver [RB-G-K10C]](https://cdn11.bigcommerce.com/s-32eq2wsbti/images/stencil/500x659/products/8919/231577/miller-edge-miller-rb-g-k10c-rband-monitored-wireless-gate-transmitter-and-receiver-rb-g-k10c-rb-g-k10c__95571.1724087169.jpg?c=2 "Miller Edge Miller RB-G-K10C RBand Monitored Wireless Gate Transmitter and Receiver [RB-G-K10C]")
