Liftmaster 892LT 2 button visor learning remote [892LTMC]

The LiftMaster 892LT is designed to simplify the process of securing your property. This 2-button visor remote control allows for straightforward setup, ensuring quick access to control your garage doors and gate openers. The LiftMaster learning button, a key feature of the 892LT model, makes programming your remote hassle-free. With the liftmaster 892lt programming instructions, you'll find the integration with various systems smooth, as it's compatible not only with LiftMaster products but also with the elite gate opener remote programming process. This universal gate remote control can replace or consolidate the majority of your existing remotes, decluttering your space. For those puzzling over 'where is the learn button on the liftmaster?', it's now made easy to locate, helping streamline the liftmaster remote control setup. Whether you're looking to carry out garage remote programming or need to sync a new accessory, the 892lt liftmaster provides clear instructions. Moreover, the 892lt remote offers the convenience of controlling multiple devices, an essential for those who manage multiple entry points. Garage door remote setup with the 892LT ensures you can secure your garage or gate with a single, handy device. Overall, the liftmaster gate opener learn button demystifies synchronization, making it an ideal solution for those who value security and simplicity in their home automation systems.

The Liftmaster 892LT will work on any Liftmaster Chamberlain or Sears garage door opener with a Red, Orange, Purple or round Yellow colored learn button This unit will be replacing the older Liftmaster 972LM and 372LM remote controls.

To program the remote control you need to locate the learn button on your garage door motor. To do this locate the antenna wire hanging down from the unit, typically the logic board with the learn button is directly above that wire. You may have to open up a light lens cover to access it.

Once you locate the colored learn button, go ahead and put the remote in the program mode by sliding open the access door. Inside you'll find a triple A battery and a small black round program button. Simply press and hold this program button until the LED on the remote lights up with a solid steady light. Then press and release the colored learn button on your garage door opener until the LED on the opener lights up.

Then on your remote control decide which of the 2 button you want to use to open the door. Then press that button and see if the garage door responds by either moving or flashing the light bulbs. If it doesn't, keep pushing the same button slowly until the door responds. You need to make sure after each push you wait for the LED light on the remote to stop flashing and go back to steady.

When the door responds in the remote control press the round program button next to the battery and that locks in the code.
You can push the button on the remote and test it out and everything should be working fine at that point.

The other feature on this remote is that it can learn a code directly from a Liftmaster dip switch remote like the 61LM or 361LM. To program it using this feature take the remote control, press and hold the round black learn button inside the remote next to the battery until the LED lights up and stays on steady. Now press and hold the button on the DIP switch remote control until the LED on the 892LT remote starts to flash rapidly release the button. Then push one of the four buttons on the 892LT that you want to use to open the device. They light will go back to steady then press the round button inside to lock it in. You can then try it and it should open your gate or garage door.

We have a video on our site that goes through these steps on our website next to the product.