LC-36A safety eye sensors for Liftmaster Commercial Mechanical Operators.
LiftMaster LC-36A Light Curtains provide 36 in. of coverage to keep your
customers, employees and equipment safe. The LC-36A must be used with a
primary entrapment device and be installed along the vertical plane of the door.
The light curtains are NEMA 4 rated which provides protection against direct
water spray and makes the LC-36A ideal for use in auto dealerships, fire stations,
municipal garages and commercial storage facilities.
Performance
Color-coded transmitter and receiver for easy identification.
Provides 36 in. of effective height coverage to increase the area
of protection.
Multiple sets of LC-36A curtains can be mounted on a door providing
coverage flexibility*.
Maximum door width of 33 ft. ensures coverage for most
commercial doors.
Eight (8) LEDs per side and 22 cross-beams produce an invisible
curtain of infrared light for maximum detection capability.
Solid LED lights indicate correct sensor alignment,
simplifying installation.
Green LED on receiver flashes when interrupted, providing visible
interrupt detection.
* See instruction manual for requirements.
The LiftMaster LC-36A is an ancillary device and must be used with a
primary monitored entrapment device to maintain compliance with UL 325.
The LiftMaster CPS-UN4, CPS-RPEN4, CPS-OPEN4 and CPS-U meet this
requirement. Failure to use the appropriate sensor or failure to install the
sensors properly, may expose the installer and customer to liability, should
an accident occur.
Color-coded transmitter and receiver for easy identification.
Provides 36 in. of effective height coverage to increase the area
of protection.
Multiple sets of LC-36A curtains can be mounted on a door providing
coverage flexibility*.
Maximum door width of 33 ft. ensures coverage for most
commercial doors.
Eight (8) LEDs per side and 22 cross-beams produce an invisible
curtain of infrared light for maximum detection capability.
Solid LED lights indicate correct sensor alignment,
simplifying installation.
Green LED on receiver flashes when interrupted, providing visible
interrupt detection.
* See instruction manual for requirements.
The LiftMaster LC-36A is an ancillary device and must be used with a
primary monitored entrapment device to maintain compliance with UL 325.
The LiftMaster CPS-UN4, CPS-RPEN4, CPS-OPEN4 and CPS-U meet this
requirement. Failure to use the appropriate sensor or failure to install the
sensors properly, may expose the installer and customer to liability, should
an accident occur.
![CPI Interface Box [CPICARD]](https://cdn11.bigcommerce.com/s-32eq2wsbti/images/stencil/500x659/products/8646/201445/41K4629-2T__89129.1550190415.jpg?c=2 "CPI Interface Box [CPICARD]")
