New Liftmaster CSW24UL (replaces older model CSW24VDC and CSW24U)
Commercial swing gate operator with battery backup system
Updated unit complies with new UL325 code revised Aug 2018
System now requires monitored secondary entrapment devices
unit will include LMRRU safety photo eye
***Can only be used on level swinging gate
MODEL CSW24UL High-Traffic Commercial DC Swing Gate Operator with Battery Backup The LiftMaster Elite Series model CSW24UL is engineered for a million cycles in high-cycle, heavy-duty applications. A Battery Backup System provides uninterrupted access when the power is out, and Security+ 2.0 technology virtually eliminates radio interference. It also features integrated MyQ technology and the industry's only standard blue-tooth wireless dual gate communication system. The CSW24UL is rated for gates 18 ft. long or 1,200 lbs. Battery Backup System provides uninterrupted access when the power is out Provides up to 7 days or 100 cycles on battery backup. Also powers safety and ancillary devices. Provides 2x the range of standard remote controls Our patented Security+ 2.0 Technology provides two times the range of standard remote controls and virtually eliminates radio interference. An on-board radio receiver is included with the CSW24UL. It holds up to 50 remotes and is compatible with HomeLink® version 4 and higher. Wireless dual gate communication prevents driveway scars and expensive wiring The on-board radio receiver provides a single remote control solution for gates and additional access points. It also features the industry's only standard wireless dual gate communication system that saves installation time and cost and eliminates unsightly scars from cutting driveways to run conduit for primary/secondary communication wiring.
Operators are to be installed by authorized Liftmaster technicians only.
5 years Commercial
7 Years Residential
Liftmaster CSW24VDC Installation Manual (click here)
Click here for Brochure
Battery Backup Secures and safeguards your property by providing up to 146 cycles or up to 24 days of standby power when the power is down.
Security+2.0® Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used.
MyQ® Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app.
P3 Motors LiftMaster has designed its own purpose built motor to meet the exact requirements needed to open and close your gate.
LED DIAGNOSTIC DISPLAY Simplifies installation and troubleshooting.
SOLAR-READY ULTRA-RELIABLE SYSTEM Simple solar conversion delivers power when you need it most and is extremely power efficient at all other times to maximize solar performance.
PROGRAMMABLE AUXILIARY RELAYS Easily add additional features, such as warning lights/alarms.
BI-PART DELAY Monitors and adjusts speed and position of each wing to ensure primary gate closes last.
SYNCHRONIZED CLOSE Simultaneously closes gates.
PRE-MOTION WARNING ALARM Activates onboard alarm three seconds prior to gate motion.
ANTI-TAILGATE Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt loop or breaks photo beam. Once vehicle backs up, gate will continue to close.
QUICK CLOSE Closes the gate immediately after a vehicle pulls off the interrupt loop.
HOMELINK® COMPATIBLE Version 4 and higher.
SECURITY+ 2.0® ON-BOARD RADIO RECEIVER Up to 50 remote controls (unlimited with 811LM/813LM).
ENGINEERED FOR MORE THAN 1 MILLION CYCLES, OUR P3 Motor is designed to perform in the most demanding environments.
HEAVY-DUTY COMMERCIAL GEAR DRIVEN TRANSMISSION Provides unsurpassed reliability.
SOFT START/STOP and MID TRAVEL REVERSAL extends operator and hardware life in high-cycle and heavy-gate applications.
WIRELESS DUAL-GATE COMMUNICATION Eliminates expensive conduit costs and unsightly driveway scars.
FIRE DEPARTMENT COMPLIANCE allows gate to auto open upon loss of AC power or battery depletion
QUICK CLOSE/ANTI-TAILGATE quickly secures property, preventing unauthorized access.
SURGE SUPPRESSION provides industrial surge and lightning protection against strikes up to 50 feet away
POWER 120V/230V Single Phase.
ACCESSORY POWER 24VDC 500mA output. Switched and unswitched power.
MONITORED SAFETY INPUTS 3 Main Board, 3 Expansion Board.
TEMPERATURE SPECIFICATIONS Without Heater: -4°F (-20°C) to 140°F (60°C). With Optional Heater (HTR): -40°F (-40°C) to 140°F (60°C).Safety and Security.
GATE TRAVEL SPEED 90-degree opening in 13-15 seconds.
ConstructionP3 MOTOR® 24VDC continuous-duty motor.
OPERATOR DUTY RATING High-cycle, high-temperature continuous duty.
CHASSIS Constructed with 1/4 in. gold zinc-plated steel for rust prevention.
WORM GEAR REDUCTION Two commercial oil bath gearboxes providing 900:1 worm gear reduction.
COVER High-density, UV-resistant polycarbonate 2-piece cover for excellent heat and corrosion resistance.
OPERATOR WEIGHT 206 lbs.
RECOMMENDED CAPACITIES Rated for gates up to 18 ft. in length or weighing up to 1,600 lbs.