ORDER THIS IF YOU WANT TO SPECIFY A FAC CODE AND SEQUENCE NUMBERS OF REMOTES (ALLOW 2 WEEKS FOR DELIVERY) Min order 10 pcs
The Model ACT-31DHC is a 1-Channel Factory Block Coded Key Ring TRANS PROX Transmitter & 26-bit Wiegand Proximity Tag designed for use with Linears access control products. The Model ACT-31DHC is supplied with a quick-disconnect key ring and also includes lithium batteries which are rated for a five-year service life. The TRANS PROXs unique 10-second time-out feature prevents the device from transmitting continuously, unlike other transmitters that can shut down an access system if they are stuck in the transmit mode.
The ACT-31DHC also contains a 26-bit Wiegand interoperable with certain HID® 125-kHz proximity card formats, proximity tag programmed to the same block code as the transmitter. The tag is compatible with Linears Model AM-DPR Proximity Reader. Waving the transmitter near the reader will request access from the system.
The transmitter utilizes Linears renowned MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver learns each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter.
Block coded transmitters are factory programmed to a sequential series of transmitter ID codes. When used with a Linear access controller, transmitters can be locally or remotely programmed into memory by entering the first and last codes of the block into the system. Facility codes can be selected to further customize the system.
- Compatible with all Linear access receivers and controllers
- Built-in 26-bit Wiegand interoperable with certain HID® 125-kHz proximity card formats, proximity tag
- Eliminates the need for a separate proximity card or tag and transmitter
- Supplied with a convenient quick-disconnect key ring
- Pre-programmed with the same facility and ID codes for transmitter and proximity tag
- Power: Two 2016 batteries
- Codes: Factory block coded in MegaCode format
- RF frequency: 318 MHz
- Dimensions: 1.25″ W x 2.25″ H x .48″ D