DoorKing 1610-087 Traffic Spike Extension 3' x 20", Surface Mount
TRAFFIC CONTROL SPIKE SYSTEMS
Surface spikes install easily without trenching and doubles as a speed bump. Spring loaded surface mount available in 3 foot sections. CAUTION: not to be used in areas subject to freezing weather with the potential for snow and ice accumulation.
Traffic control spikes are ideal for controlling traffic direction and speed through a controlled entry location. Traffic spikes prevent vehicles from proceeding through a traffic lane in the wrong direction by enforcing one-way traffic lanes. Traffic crossing these spikes in excess of 5 MPH may cause tire damage and create excessive wear in the spike system.
CAUTION: Installation and use of traffic control spike units in areas that are subject to freezing weather with potential of snow and ice accumulation IS NOT RECOMMENDED. The units can freeze in the up position and cause unintended damage or injury due to the inability for the spikes to retract.
- Spikes sections available in 3-foot sections.
- End caps provide a smooth end to the spike section.
- Torsion springs.
- Lock-down standard.
- Surface mount unit.
- 1/4-inch diamond plate painted bright yellow for easy visibility.
- 2-inch rise provides a built-in speed bump.
- Dimensions: 2"H x 20"W x 36"L. Warning signs must be used with traffic spikes to warn drivers that a one-way traffic lane condition exist.
- Speed bumps must always be used with traffic spikes. Speeds in excess of 5-MPH over the spikes can cause tire damage and excessive wear on the spike system.
- Do not use in areas subject to freezing temperatures with potential of snow and ice accumulation.
- 20,000 Lb. per axle maximum weight limit.
