Doorking 1815-230 RF 10 Proximity Card Reader

(No reviews yet)
SKU:
1815-230
Availability:
In Stock

Product Price: $237.01
Condition:
New

Doorking 1815-230 Proximity Card reader on housing for use with Access Plus system Note: This is not a stand alone use (see 1520-083 for stand alone) 26 Bit Wiegand Output Up to 4-inch raed range Doorking DKS Format Read ranges are not absolute and will vary depending on several factors including where the reader is mounted, the mounting surface and product applications. ( Min Order for Special coded cards is 100 adn there will be a 75 cent per card charge) 26-bit Weigand output. Most readers operate on 5-12 VDC. This Proximity readers is not designed for stand-alone operation and must be connected to an access controller.

These readers output the card data to the access controller (1833, 1835, 1837 or 1838) where the decision to grant or deny access is made. These readers are ideal for both pedestrian and vehicular access control. Proximity cards transmit their information to the card reader without any physical contact. This provides an easy to use vandal resistant system. Access is granted when a valid card is presented to the card reader. Dimensions of the various card readers available vary with the reader make and the read distance. As a general rule of thumb, the longer the read distance, the larger the card reader Because physical contact is not required, proximity cards can transmit their data through common building materials like: concrete, brick, stone, drywall, plaster, glass, wood, plastic...in fact, through anything but metal. Proximity card readers are maintenance free. There are no parts to wear out or adjust. Passive card technology provides and unlimited number of "card reads" with no battery to wear out. Active cards provide a much longer read range, but use a battery that will require replacement in time (2-years approximately). Passive cards, unless they are physically abused, will last virtually forever.
Standard Features • Proximity card readers are maintenance free. There are no parts to wear out or adjust. • Passive card technology provides an unlimited number of "card reads" with no battery to wear out. Active cards provide a much longer read range, but use a battery that will require replacement in time (2-years approximately). • Passive cards, unless they are physically abused, will last virtually forever. Frequency 125 kHz Output 26-bit Wiegand Mounting Outdoor Enclosure for Surface or Gooseneck Mount Power Supply 5 - 12 VDC Current Draw 180 mA Card Compatibility Passive or Active Read Range Up to 4" (Passive) to 16" (Active) Operating Temperature -31°F to 149°F Indicators (LED) Red, Green Housing Exterior - Surface Mount Dimensions 6.25"h x 5.25"w x 4.38"d Warranty 5 year limited factory warranty